Brevard Fence Guide is a free local referral service. We don't install fences ourselves — we connect Brevard County homeowners with one vetted local fence professional. You never pay us; our pro pays us a referral fee.

Wood Privacy

Wood privacy fencing — classic, affordable, and honest about Florida rot.

Stockade, board-on-board, and shadowbox styles in pressure-treated pine, with straight talk about lifespan and rot in Brevard's wet, sandy soil.

Free, no obligation. We connect you with one vetted local pro — you never pay us.

What wood privacy styles can I choose from?

Three common styles:

  • Stockade — tapered pickets butted tightly together, the most affordable privacy option. As wood dries, small gaps can open between pickets.
  • Board-on-board — pickets overlap on both sides of the rails, so there are no gaps even as wood shrinks. Full privacy, more material, higher cost.
  • Shadowbox — alternating pickets on opposite sides of the rails. Looks the same from both sides, allows some airflow, and is the most neighbor-friendly style.

What are typical per-foot cost ranges for wood privacy fencing?

Widely-published 2026 U.S. installed typical ranges (pressure-treated pine, 6 ft):

  • Stockade: $18–$28 per linear foot
  • Shadowbox: $22–$35 per linear foot
  • Board-on-board: $28–$45 per linear foot

Figures shown are conservative, widely-published 2026 U.S. installed typical ranges, labelled as "typical ranges." The exact quote depends on footage, material, and site conditions. No figure is a verified Brevard price.

How long does a wood fence last in Florida, really?

Honestly, wood is the material most affected by Florida's climate. In Brevard's heat, humidity, and sandy soil, a pressure-treated pine privacy fence typically lasts 10–15 years with regular maintenance — sometimes less in poorly drained yards or near the coast. Posts set in concrete rot first, often at the ground line where wet soil meets air. Staining or sealing every 2–3 years extends the life meaningfully. If you want a fence that won't rot, consider vinyl or aluminum.

Why pressure-treated pine?

Pressure-treated pine is the standard for affordable wood fencing in Florida because the chemical treatment resists rot and termites far better than untreated wood. Cedar and cypress are more rot-resistant but cost noticeably more. Our pro can quote both if you're interested.

Will my wood fence rot at the posts?

Post rot at the ground line is the most common wood-fence failure in Brevard. A good installer mitigates it with proper concrete setting, gravel drainage, and sometimes metal post sleeves. Even so, expect some posts to need replacement over the fence's life — see our fence repair page.

Get your free quote match

Tell us about your fence project and we'll connect you with one vetted local Brevard fence professional. There's no cost to you and no obligation — our pro pays us a referral fee, not you.

  • ✓One matched pro, hand-vetted for Brevard County work.
  • ✓Free on-site quote — you never pay us a cent.
  • ✓Fast response, usually within one business day.

Free, no obligation. We connect you with one vetted local pro — you never pay us.

Frequently Asked Questions

How often should I stain or seal a wood fence in Florida?+
Every 2–3 years is typical in Brevard's sun and humidity. A quality stain with UV and moisture protection slows both fading and rot.
Will gaps open between my stockade pickets?+
Yes — as pressure-treated pine dries it shrinks, and small gaps can appear. If full privacy matters, choose board-on-board or shadowbox instead.
Is wood allowed by Brevard HOAs?+
Most HOAs allow wood privacy fencing, often with height and stain-color restrictions. Check your HOA guidelines before ordering.
Can I mix wood posts with vinyl or aluminum panels?+
It's possible but generally not recommended — the materials weather and fail at different rates. Our pro can advise on the best single-material approach for your yard.
Wood or vinyl for a beachside home?+
Neither is ideal in direct salt air. Wood rots faster and vinyl can chalk. Aluminum is usually the better beachside choice — see our aluminum page.