Brevard Fence Guide is a free local referral service. We don't install fences ourselves — we connect Brevard County homeowners with one vetted local fence professional. You never pay us; our pro pays us a referral fee.

Gate Installation

Gate installation — walk gates, drive gates, and hardware that doesn't sag.

The right gate and hardware make the difference between a fence that works for years and one that drags and sags within a season.

Free, no obligation. We connect you with one vetted local pro — you never pay us.

What types of gates can our pro install?

Two main categories:

  • Walk gates — single-leaf pedestrian gates, usually 3–4 feet wide, for people and yard access.
  • Double drive gates — two-leaf gates spanning a driveway, typically 8–20 feet wide, for vehicle access.

For powered vehicle gates, see our automatic gates page.

What are typical cost ranges for gate installation?

Widely-published 2026 U.S. installed typical ranges:

  • Walk gate (wood or vinyl, installed): $300–$900
  • Double drive gate (wood or vinyl, installed): $900–$2,500
  • Aluminum walk gate: $400–$1,200
  • Gate hardware (hinges, latches, drop rods): $50–$250

Figures shown are conservative, widely-published 2026 U.S. installed typical ranges, labelled as "typical ranges." The exact quote depends on footage, material, and site conditions. No figure is a verified Brevard price.

Why do gates sag, and how do you prevent it?

Sagging is the #1 gate problem in Brevard. It happens when a gate post isn't set deep or wide enough in concrete to hold the gate's weight, or when the gate frame lacks a diagonal brace. Our pro prevents it by setting gate posts deeper than line posts, using heavy-duty hinges, and bracing the frame correctly. If your existing gate already sags, see our fence repair page.

What hardware should I choose?

For pool gates, hardware must be self-closing and self-latching with the latch at 54 inches (see our pool fence page). For drive gates, drop rods and cane bolts keep each leaf secure. Stainless or coated hardware resists corrosion best near the coast.

Can a gate be added to my existing fence?

Often yes. Our pro can cut in a walk gate to an existing wood, vinyl, or chain link line, though matching exact material and color can be tricky for discontinued styles. A drive gate usually needs new, deeper-set posts.

Get your free quote match

Tell us about your fence project and we'll connect you with one vetted local Brevard fence professional. There's no cost to you and no obligation — our pro pays us a referral fee, not you.

  • ✓One matched pro, hand-vetted for Brevard County work.
  • ✓Free on-site quote — you never pay us a cent.
  • ✓Fast response, usually within one business day.

Free, no obligation. We connect you with one vetted local pro — you never pay us.

Frequently Asked Questions

How wide should a drive gate be?+
Most single-car drive gates are 10–12 feet; double gates 16–20 feet. Allow a few inches of clearance for swing. Our pro measures your vehicles and driveway.
Can I automate a manual gate later?+
Yes, many manual gates can be retrofitted with an opener. If you think you'll want automation, tell our pro up front so the gate is built to handle it.
Do gates need a permit?+
A gate that's part of a pool barrier must meet Florida code. Other gates usually follow the fence's permit status. Confirm with your city.
What's the best gate material for beachside?+
Aluminum with coated hardware resists salt air best. Vinyl also works. Wood gates sag faster in coastal humidity.
Can you fix a gate that won't latch?+
Yes — usually it's a post that's shifted or hinges that need adjustment. See our fence repair page for quick fixes.