Florida Fence Cost
How much does a fence cost in Florida?
Per-linear-foot typical ranges for the common Florida fence materials — plus how coastal Florida typically runs higher than inland. Use these as a planning starting point before you ask for a quote.
What are the per-foot typical ranges for a fence in Florida?
Below are conservative, widely-published 2026 U.S. installed typical ranges for the materials Florida homeowners use most. Every figure is a typical range, not a fixed quote.
| Material | Typical range (per linear foot) |
|---|---|
| Chain link (galvanized) | $12–$25 per linear foot |
| Chain link (vinyl-coated) | $15–$30 per linear foot |
| Wood privacy (pressure-treated pine) | $18–$35 per linear foot |
| Vinyl / PVC privacy | $25–$45 per linear foot |
| Aluminum ornamental | $30–$60 per linear foot |
Typical ranges, checked November 2026. Exact quotes depend on footage, material, and site conditions.
Is a fence more expensive in coastal Florida than inland?
Typically, yes. Coastal Florida — including the beachside communities of Brevard County — often runs toward the higher end of a range. The reasons add up fast: salt air pushes homeowners toward corrosion-resistant materials like vinyl and aluminum, sandy soil can mean deeper, more labor-heavy post setting, and wind-exposed lots may call for heavier posts or bracing. Inland areas with firmer soil and fewer salt concerns often land toward the lower end of the same range.
How do I turn a per-foot range into a total?
Multiply footage by the per-foot range — for example, 150 ft of vinyl privacy at $25–$45 per foot is 150 × $25–$45 = $3,750–$6,750. That total covers the fence run itself; gates, old-fence removal, permits, and clearing are usually extra. For a full total-project table at 100, 150, and 200 ft, see our Brevard County fence cost guide.
Which material is cheapest in Florida?
Galvanized chain link is typically the lowest-cost option per foot. Vinyl and aluminum cost more up front but need less maintenance in Florida's humidity and sun. Wood is mid-range up front but requires ongoing staining and will eventually rot in our wet climate. Compare materials on our best fence for Florida weather page.
Why do Florida fence quotes vary so much?
Footage, material grade, and site conditions drive most of the difference. A 6-foot privacy fence costs more per foot than a 4-foot picket. Sandy beachside soil may need deeper post holes. Sloped lots, tight access, and extra gates all add labor. That's why an on-site quote is the only way to get a real number.
Get your free quote match
Tell us about your fence project and we'll connect you with one vetted local Brevard fence professional. There's no cost to you and no obligation — our pro pays us a referral fee, not you.
- ✓One matched pro, hand-vetted for Brevard County work.
- ✓Free on-site quote — you never pay us a cent.
- ✓Fast response, usually within one business day.