BREVARD COUNTY, FLORIDA
Fence Installation in Melbourne Beach, FL — Free Local Referral
Brevard Fence Guide is a free local referral service. We don't install fences ourselves — we connect Brevard County homeowners with one vetted local fence professional. You never pay us; our pro pays us a referral fee.
What fence work can I get help with in Melbourne Beach?
Melbourne Beach is a small beachside town with both ocean and river frontage, and its fence code is strict by design. Our vetted pro handles vinyl and PVC, wood privacy, aluminum, pool barriers, gates, repairs, full replacements, and standalone removal here — and is used to the town's survey and finished-side requirements. Tell us the footage, material, and goal and we'll pass it to one matched local pro.
Does Melbourne Beach require a permit and a survey for a fence?
Yes to both. Under Town of Melbourne Beach Code section 7A-53, a fence permit is required, and every application must include a survey by a licensed surveyor. There is no shortcut around the survey step here — plan for it before anything is ordered.
How tall can my fence be in Melbourne Beach?
The town's published heights are 6 ft maximum at the rear and sides, and 4 ft beyond the front building line — with a 6 ft exception along A1A and Oak Street. Because this is a beachside town with tight sight-line rules, confirm the exact setbacks for your lot with the Town of Melbourne Beach before you build.
Which way does the finished side of my fence face in Melbourne Beach?
The finished side must face out — toward the street or the neighboring property, not toward your own yard. This is a common beachside rule and the town enforces it, so make sure your pro plans the orientation on the survey.
Are there corner and front-yard rules I should know about?
Yes. A 25-foot corner vision triangle must stay clear so drivers can see at intersections, and fences built in front yards after March 2023 carry a 4-foot vegetation/landscaping rule. Both can affect where and how tall a front fence can go.
Is chain link allowed everywhere in Melbourne Beach?
No. Chain link is not allowed at beach or river access points. If your lot touches a public access path to the ocean or river, plan on a different material for that section. Vinyl-coated chain link or aluminum are common substitutes where chain link is restricted.
What are typical cost ranges for a fence in Melbourne Beach?
Below are conservative, widely-published 2026 U.S. installed typical ranges for common materials. Use them as a planning starting point only.
| Material / job | Typical range |
|---|---|
| Chain link, galvanized | $12–$25 per linear foot |
| Chain link, vinyl-coated | $15–$30 per linear foot |
| Wood privacy | $18–$35 per linear foot |
| Vinyl / PVC privacy | $25–$45 per linear foot |
| Aluminum ornamental | $30–$60 per linear foot |
| Pool fencing | $40–$70 per linear foot |
Figures shown are conservative, widely-published 2026 U.S. installed typical ranges, labelled as "typical ranges." The exact quote depends on footage, material, and site conditions. No figure is a verified Brevard price.
Get your free quote match
Tell us about your fence project and we'll connect you with one vetted local Brevard fence professional. There's no cost to you and no obligation — our pro pays us a referral fee, not you.
- ✓One matched pro, hand-vetted for Brevard County work.
- ✓Free on-site quote — you never pay us a cent.
- ✓Fast response, usually within one business day.